|
|
|
|
|
| Using the Mixer | |
| MIC/INST Parameters |
| |
|
| ||
|
|
|
|
The MIC/INST parameters include microphone input (input via |
| ||
|
|
|
|
| Parameter Name | Description | Setting Range |
| Part | Specifies if sound input via a microphone should be output (on) or not output | oFF, on* |
| (Mic/Inst Enable) | (oFF). |
|
|
|
|
|
| Volume | Specifies the volume level of sound input via a microphone.*1 | 0 to 127* |
| (Mic/Inst Volume) |
|
|
|
|
|
|
| Pan | Specifies the stereo pan position of sound input via a microphone. 0 indicates | |
| (Mic/Inst Pan) | the center, while a smaller values shifts to the left and a larger value shifts to the |
|
|
| right. |
|
|
|
|
|
| DSP Line | Specifies whether DSP should be applied to microphone input. | oFF, on* |
| (Mic/Inst DSP Line) |
|
|
|
|
|
|
| Rev.Send | Specifies how much reverb is applied to sound input via a microphone. | 0 to 40* to 127 |
| (Mic/Inst Reverb Send) |
|
|
|
|
|
|
| Cho.Send | Specifies how much chorus effect is applied to sound input via a microphone. | 0* to 127 |
| (Mic/Inst Chorus Send) |
|
|
|
|
|
|
*1 See the block diagram under “Configuration of Effects” (page