Using the Song Sequencer

7. Start playing something on the keyboard.

 

To record to Tracks 01 through 16

 

• Recording starts automatically when you perform any

 

 

 

1. Press the C-3 (SONG SEQUENCER) button to

one of the following operations.

– Playing on the keyboard

 

enter the song sequencer mode.

–Pressing the L-13 (INTRO), L-14 (NORMAL/

FILL-IN), or L-15 (VARIATION/FILL-IN) button

 

 

 

 

– Pressing the L-17 (START/STOP) button. To input

 

 

 

 

one or more rests before starting recording, press the

 

 

 

 

L-17 (START/STOP) button to start recording, and

 

 

 

 

then start keyboard play at the point you want.

 

 

 

 

• Starting recording will cause the C-4 (RECORD) button

Song area number

to change from flashing to lit. During recording, the

 

 

 

 

 

 

 

 

display will show the current measure (MEASURE) and

 

 

 

 

beat (BEAT).

 

 

 

 

•PITCH BEND wheel (S-1)and pedal operations are also recorded.

•When recording reaches a point where there is less than 100 notes of remaining memory capacity, the current measure (MEASURE) and beat (BEAT) values will start flashing.

8. To stop recording, press the L-17 (START/

•

An asterisk (*) next to a song area number indicates

 

that there is already data recorded in that area.

STOP) button.

•

L in the level meter indicates that the system track is

• At this time you can press the L-17 (START/STOP)

 

currently selected, while M indicates that another track

button to replay what you have just recorded. For

 

(01 through 16) is selected. In the case of M, which

details about playing back recorded content, see

 

track is selected is indicated by the position of a pointer

“Playing a Recorded Song” (page E-73).

 

(e).

9. To exit the song sequencer, press the C-3

•

A black box (

 

) in the level meter above a track

 

 

 

number indicates that there is already data recorded in

(SONG SEQUENCER) button or the R-15 (EXIT)

 

that track.

button.

2. Use the dial or R-14 (–, +) buttons to select a

 

 

song area number.

 

•

Selecting a song area that already contains recorded

 

 

data will immediately recall the header settings of the

 

 

song (page E-67).

 

3. Press the C-4 (RECORD) button.

• The button will start to flash and the Digital Keyboard will enter record standby, which means recording will start whenever you play something on the keyboard. Up to step 7, take care that you do not accidentally press a keyboard key and unintentionally start recording.

E-69