Lit
Lit
Lit
Lit
unlit.
Selecting and Playing a Tone

To use layer and split together

LOWER 1

UPPER 1

LOWER 2

UPPER 2

1. Use the “Tone List” (page E-57) to look up the group(s) and numbers of the tones (UPPER 1, UPPER 2, LOWER 1, and LOWER 2 zone tones) you want to use.

2. Check to make sure that the both the  (LAYER) and  (SPLIT) button lamps are unlit.

•If one or both lamps are lit, press the  (LAYER) and  (SPLIT) buttons to turn them off.

3.Press the (UPPER 1) button so its lamp is lit.

•This indicates you can select the UPPER 1 zone tone.

Lit

4. Select the UPPER 1 zone tone.

•For details about selecting tones, see “To select a tone” (page E-11).

5.Press the  (LAYER) button so its lamp is lit.

Lit

Unlit Lit

•This will cause the (UPPER 2) button lamp to light. This indicates you can select the UPPER 2 zone tone.

6.Select the UPPER 2 zone tone.

7. Press the  (LAYER) button so its lamp is

8. Press the  (SPLIT) button so its lamp is lit.

•This will cause the (LOWER 1) button lamp to light. This indicates you can select the LOWER 1 zone tone.

9.Select the LOWER 1 zone tone.

10.Press the  (LAYER) button so its lamp is lit.

•This will cause the (LOWER 2) button lamp to light. This indicates you can select the LOWER 2 zone tone.

11.Select the LOWER 2 zone tone.

12.Play something on the left and right sides of the keyboard to confirm that the tones are assigned and layered properly.

•You can change any of the zone tones at any time by performing one of the operations shown below.

To change this

Do this:

zone’s tone:

 

UPPER 1 zone

Press the (UPPER 1) button and

 

then select a tone.

 

 

UPPER 2 zone

Press the (UPPER 2) button and

 

then select a tone.

 

 

LOWER 1 zone

Press the (LOWER 1) button and

 

then select a tone.

 

 

LOWER 2 zone

Press the (LOWER 2) button and

 

then select a tone.

 

 

E-15

English