Using Registration Memory

Saving Registration Memory Bank Data to a File

Registration data can be stored to a file in the Digital Piano’s internal memory area or on an SD card. You can store the registration data in a single registration memory bank (eight areas) or the data in all of the registration memory banks (64 areas) to a file.

NOTE

•When you save registration memory bank data to a file, a file name is assigned automatically in accordance with the following rules.

•If you save the data in a single bank, the file name will be in the format: <first 6 characters of bank name><2-digit number specified by you>.CB6.

•If you save the data in all the banks, the file name will be in the format: <REGIST><2-digit number specified by you>.CR6.

•Before saving registration memory bank data to an SD card, be sure to first read the important information contained in the following sections of this user’s guide.

•“Card and Card Slot Precautions” (page E-46)

•“To load and remove a memory card” (page E-46)

•“To format a memory card” (page E-46)

To save registration memory bank data to a file

1. Depending on where you want to save the data file, perform one of the steps shown below.

If you are saving the file

Perform this operation:

here:

 

Internal area

Remove the SD card from the

 

Digital Piano’s card slot.

 

 

SD card

Insert the SD card into the

 

Digital Piano’s card slot.

 

 

2. While holding down the  (FUNCTION) button, press the  (LOAD/SAVE) button.

•This enters the LOAD/SAVE mode.

3. Depending on the type of operation you want

to perform, use the  (u) and  (i) buttons to display one of the screens shown below.

To save the data in a single bank

To save the data in all banks

4. Use the  (w, q) buttons to specify the two-digit number you want to append to the name of the file.

5. Press the  (ENTER) button.

•This saves the file.

•The message “Replace?” will appear if a file with the

same name already exists. If you want to replace the existing file with the one you are saving, press  (YES). Press  (NO) to return to the screen in step 4 of this procedure without saving.

6.To exit the LOAD/SAVE mode, press the  (EXIT) button.

NOTE

•A registration memory bank data file saved to an SD card will be placed in the MUSICDAT folder. The MUSICDAT folder is created automatically when you format the memory card on the Digital Piano (page E-46). Note that load, delete, and rename operations cannot be performed on files that are not inside the MUSICDAT folder, or on files in folders that are inside the MUSICDAT folder. Keep this restriction in mind whenever handling SD card files with your computer.

E-36