Using the Function Menu

MASTER CONTROL CARD PLAYER

The function menu contains global settings (overall tuning and touch adjustment, local control ON/OFF, etc.) that need to be changed by you relatively infrequently. It also includes some SD card operations (format, etc.)

Function Menu Operations

This section explains operations involving function menu settings. For details about specific function menu items, see “Function Menu Settings” (page E-39).

To change the setting of a function menu item

1. Press the  (FUNCTION) button.

•The button’s lamp will light, and the display will change as shown below.

Item name

“%” indicates the setting.“>ENT”

 

indicates a setting group.

2. You can use a number button ( (1) through  (8)) to select another item to change its setting.

•Each number button corresponds to the numbers of the items under “Function Menu Settings” (page E-39).

•You also can scroll sequentially through settings with the  (u) and  (i) buttons.

•“>ENT” to the right of an item indicates a setting

group. In this case, press the  (ENTER) button to enter the setting group. Next, use the  (u) and  (i) buttons to scroll through the items in the group.

3. Use the  (w, q) buttons to change the currently displayed setting.

•Holding down the  (FUNCTION) button as you press w or q will change the setting by a factor of 10.

4.To exit the function menu, press the  (EXIT) button or the  (FUNCTION) button.

IMPORTANT!

•Turning off the Digital Piano causes all function menu settings to return to their initial defaults. If you need to save a function menu setup, perform the backup operation. For details, see “Backup” (page E-40).

•Some function menu settings also can be saved to registration memory. For details, see “Using Registration Memory” (page E-34).

ENTEREXIT

•To exit a setting group, press the  (EXIT) button.

E-38