Using Registration Memory 
4. While holding down the (STORE) button, press one of the number buttons ( (1) through (8)) to specify the number of the area (1 to 8) where you want to save the registration data.
ck cl cm cn co cp cq cr | dm |
•Pressing a number button immediately executes the registration data save operation.
•The following shows how the display would appear if you select Bank 1, Area 3.
Area number
Bank number
To recall a setup saved as registration data
1. Press the (REGISTRATION) button so the lamp below it is lit. This is the REGISTRATION mode.
2. Use the (w, q) buttons to scroll through the banks (1 to 8) until the one where the registration data you want to recall is displayed.
3. Press one of the number buttons ( (1) through (8)) to specify the number of the area (1 to 8) where the registration data you want to recall is located.
•Pressing a number button immediately recalls and applies the setup in accordance with the registration data being recalled.
•The following shows how the display would appear if you select Bank 3, Area 7.
To rename a registration memory bank
1. While holding down the (FUNCTION) button, press the (REGISTRATION) button.
2. Use the (w, q) buttons to scroll through the banks (1 to 8) until the one you want to rename is displayed.
•This displays a screen for editing the name.
3.Edit the name.
•The initial default name of all the banks is “REGIBANKNAME”.
•Use the (u) and (i) buttons to move the cursor left and right, and the (w, q) buttons to scroll through characters at the current cursor position. The following shows the characters that can be used in a name.
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
|
|
|
|
|
|
|
|
|
|
A | B | C | D | E | F | G | H | I | J |
|
|
|
|
|
|
|
|
|
|
K | L | M | N | O | P | Q | R | S | T |
U | V | W | X | Y | Z | S | & | _ | ' |
|
|
|
|
|
|
|
|
|
|
( | ) | - | ^ | { | } | @ | ~ | ` |
|
• You can specify up to 12 characters for a bank name.
4.After the name is the way you want, press the
(ENTER) button.
5.In response to the confirmation message
(“Sure?”) that appears, press the (YES) button to apply the change or the (NO) button to return to the screen in step 3 of this
procedure without changing anything.
NOTE
•To display a bank name, hold down the (REGISTRATION) button on the registration mode screen.
English