Casio MA1003-A, PX-3, PX3ES1A External MIDI Device Connection, Specifying the Zone Configuration, Keyboard, Using the Digital Piano as a MIDI Master, E-26, LAYER lit, SPLIT lit

Using the Digital Piano as a MIDI Master

Keyboard MASTER CONTROL

A unique MIDI channel can be assigned to each of the Digital Piano’s four zones (UPPER 1, UPPER 2, LOWER 1, LOWER 2) to provide simultaneous control of up to four external MIDI devices.

IMPORTANT!

•This section provides only basic information about how to use the Digital Piano as a MIDI master keyboard. For details about the MIDI specifications of this Digital Piano, see the “MIDI Implementation” document at the website located at the URL below.

http://world.casio.com/

External MIDI Device Connection

Your Digital Piano is equipped with standard 5-pin DIN connector type MIDI OUT and MIDI IN terminals. It is up to you to purchase optionally available or commercially available MIDI cables when connecting to an external MIDI device.

IMPORTANT!

• The MIDI terminals are disabled while the Digital Piano is connected to a computer via the USB port.

Specifying the Zone Configuration

Press the  (LAYER) and  (SPLIT) buttons so their lamps are lit in one of the combinations shown below to achieve the zone configuration you want.

LAYER unlit, SPLIT unlit LAYER lit, SPLIT unlit

UPPER 1

UPPER 1

UPPER 2

LAYER unlit, SPLIT lit LAYER lit, SPLIT lit

LOWER 1 UPPER 1

LOWER 1	UPPER 1
LOWER 2	UPPER 2

NOTE

•You can change the ranges of the UPPER and LOWER zones using the procedure described under “To specify the keyboard split point” (page E-14).

E-26