Editing Zone Parameters

MASTER CONTROL

Your Digital Piano is a four-zone MIDI master keyboard (“Master Control Configuration”, page E-4). A zone is a unit that controls the internal sound source and/or external MIDI device. Just as you can select a different internal sound source tone for each zone, you also can specify a mixer, DSP and other settings for an internal sound source, and you can specify a MIDI channel and other control settings for an external MIDI device.

Zone Parameter Operations

The parameters whose settings can be configured for each zone are called “zone parameters.” To configure zone parameter settings, enter the MASTER CONTROL mode and then hold down the (ZONE EDIT) button until the zone menu appears on the display.

Page

Parameter Name

Zone Menu

Settings

•The zone menu has eight pages. Press the (ZONE EDIT) button to scroll through the pages.

•Each zone menu page includes up to four parameters, each of which corresponds one of the PARAMETER SELECTOR buttons ( (A) through  (D)).

•The format of the DPS settings on page 3 of the zone menu is a bit different from the other pages, as shown below.

•The “ZONE PARAMETER” list in the upper left of the Digital Piano’s control panel shows the zone parameters assigned to each of the PARAMETER SELECTOR buttons.

E-28