Appendix

08:Rotary

This is a rotary speaker simulator.

Parameter Value Ranges:

0 :Speed (Slow, Fast)

Switches the speed mode between fast and slow.

1:Brake (Rotate, Stop) Stops speaker rotation.

2:Fall Acceleration (0 to 127)

Adjusts acceleration when the speed mode is switched from fast to slow.

3 :Rise Acceleration (0 to 127)

Adjusts acceleration when the speed mode is switched from slow to fast.

4 :Slow Rate (0 to 127)

Adjusts the speaker rotation speed in the slow speed mode.

5 :Fast Rate (0 to 127)

Adjusts the speaker rotation speed in the fast speed mode.

09:Drive Rotary

This is an overdrive - rotary speaker simulator.

Parameter Value Ranges:

0:Overdrive Gain (0 to 127) Adjusts overdrive gain.

1:Overdrive Level (0 to 127)

Adjusts the overdrive output level.

2 :Speed (Slow, Fast)

Switches the speed mode between fast and slow.

3:Brake (Rotate, Stop) Stops speaker rotation.

4:Fall Acceleration (0 to 127)

Adjusts acceleration when the speed mode is switched from fast to slow.

5 :Rise Acceleration (0 to 127)

Adjusts acceleration when the speed mode is switched from slow to fast.

6 :Slow Rate (0 to 127)

Adjusts the speaker rotation speed in the slow speed mode.

7 :Fast Rate (0 to 127)

Adjusts the speaker rotation speed in the fast speed mode.

10:3-Phase Chorus

This is a 3-phase chorus effect using two LFOs with different sine wave rates.

Parameter Value Ranges:

0:Rate 1 (Fast LFO State) (0 to 127) Adjusts the rate of LFO 1.

1:Depth 1 (Fast LFO Depth) (0 to 127) Adjusts the depth of LFO 1.

2:Rate 2 (Slow LFO State) (0 to 127) Adjusts the rate of LFO 2.

3:Depth 2 (Slow LFO Depth) (0 to 127) Adjusts the depth of LFO 2.

4:Wet Level (0 to 127)

Adjusts the level of the effect sound.

11:Auto Pan

Performs continual left-right panning of the input signal using an LFO.

Parameter Value Ranges:

0 :Rate (0 to 127)

Adjusts the panning rate.

1 :Depth (0 to 127)

Adjusts the panning depth.

12:Stereo Phaser

This is a stereo phaser that modulates the phase using a sine wave LFO.

Parameter Value Ranges:

0 :Resonance (0 to 127)

Adjusts the strength of the resonance.

1 :Manual (–64 to 0 to +63)

Adjusts the reference phaser shift amount.

2:Rate (0 to 127) Adjusts the LFO rate.

3:Depth (0 to 127) Adjusts the LFO depth.

4:Wet Level (0 to 127)

Adjusts the level of the effect sound.

13:Phaser

This is a monaural phaser that modulates the phase using a sine wave LFO.

Parameter Value Ranges:

0 :Resonance (0 to 127)

Adjusts the strength of the resonance.

1 :Manual (–64 to 0 to +63)

Adjusts the reference phaser shift amount.

2:Rate (0 to 127) Adjusts the LFO rate.

3:Depth (0 to 127) Adjusts the LFO depth.

4:Wet Level (0 to 127)

Adjusts the level of the effect sound.

14:Distortion

This effect provides Distortion + Amp Simulator.

Parameter Value Ranges:

0 :Gain (0 to 127)

Adjusts the input signal gain.

1 :Low (0 to 127)

Adjusts the low-range gain.

The cutoff frequency depends on the DSP type.

2:High (0 to 127) Adjusts the high gain.

The cutoff frequency depends on the DSP type.

3:Level (0 to 127)

Adjusts the output level.

E-62