NOTE
• The section title bars in this user’s guide also show the mode (MASTER CONTROL or CARD PLAYER, or both) where the operations described in each section can be performed.
Lit in the REGISTRATION mode.
IMPORTANT!
• All of the operations in this user’s guide start from the initial power on default state (MASTER CONTROL, TONE mode). If you start experiencing operation problems, first try returning the Digital Piano to the MASTER CONTROL, TONE mode. If you do not mind losing currently unsaved settings and data, simply turn power off and then back on again.
Lit in the TONE mode.
• Each press of the (TONE/REGISTRATION) button toggles between the TONE and REGISTRATION modes. You can determine the current mode by noting which (TONE/REGISTRATION) lamp is lit.
Use the MASTER CONTROL mode when playing the Digital Piano in a stand-alone configuration or when using it as a MIDI master keyboard.
The setup of the MASTER CONTROL mode can be changed using common parameters (page E-18) and zone parameters (page E-28).
Use the CARD PLAYER mode to play back a MIDI file. In the CARD PLAYER mode, you can play on the keyboard along with MIDI file playback. Though the CARD PLAYER mode also supports control of an external MIDI device, parameter settings cannot be configured.
Note that you should be aware of the Digital Piano’s current mode whenever performing an operation. Note the following important points.
• The Digital Piano’s initial power on default mode is the MASTER CONTROL mode’s TONE mode.
• Each press of the (MASTER CONTROL/CARD PLAYER) button toggles Lit in the MASTER CONTROL mode. between the MASTER CONTROL and CARD PLAYER modes. You can
determine the current mode by noting which (MASTER CONTROL/CARD PLAYER) lamp is lit.
Lit in the CARD PLAYER mode.
General Guide
Modes
This Digital Piano has two main modes: a MASTER CONTROL mode and a CARD PLAYER mode. Each of these
modes has two
| MASTER CONTROL mode | CARD PLAYER mode |
| TONE mode | TONE mode |
| REGISTRATION mode | REGISTRATION mode |