Playing Back a MIDI File
To select a tone for each zone in the CARD PLAYER mode
1. Press the (LAYER) and (SPLIT)
buttons so their lamps are lit in the combinations shown below and select the tones you want.
To change this | Configure the (LAYER) and |
zone’s tone: | (SPLIT) button lamps like this: |
UPPER 1 zone | (LAYER): unlit, (SPLIT): unlit |
|
|
UPPER 2 zone | (LAYER): lit, (SPLIT): unlit |
LOWER 1 zone | (LAYER): unlit, (SPLIT): lit |
|
|
LOWER 2 zone | (LAYER): lit, (SPLIT): lit |
|
|
2. Press the (TONE) button so the lamp above it is lit.
3. Use the to (Tone Group) buttons to select the group you want.
• The lamp of the button you press will light.
4.Use the (w, q) buttons to select the tone you want.
5.Repeat steps 1 through 4 for all of the zones you want to use for keyboard play.
Creating a New Card Music Folder
When you insert an SD card, the Digital Piano searches for MIDI files inside of specific folders on the card. Under initial default settings, the folders that are searched are named “MUSICDAT” (which is assigned to Digital Piano button (A)), “MUSIC__B” (button (B)), “MUSIC__C” (button (C)), and “MUSIC__D” (button (D)). Pressing a button accesses the contents of the corresponding folder. You can use the procedure below to assign different folders to buttons (B), (C), and (D).
•The procedure below creates a new folder and assigns it to button (B), (C), or (D). Button assignments are stored on the SD card, so if you remove it, the last button assignments you used will be restored the next time you insert the card.
•If you create more than one folder for a button, the last one you create will be assigned to the button.
•Performing the procedure below does not delete or affect the content of the folder currently assigned to a button.
To create a new card music folder
1. Insert the SD card into the Digital Piano’s memory card slot.
2. Press the (FUNCTION) button.
3. Press the (7) button.
4. Use the (u) and (i) buttons to display “CardFolder” and then press the (ENTER) button.
•This causes the CARD Folder screen to appear.
5. Use the (w, q) buttons to scroll through the button names (B, C, D) until the one for which you want to create a new folder is displayed within the brackets (%).