Chapter14 Routing
BGP Address Family Configuration
14-40
Cisco 12000/10720 v3.2 Router Manager User Guide
OL-6690-01

BGP General

Local Autonomous System—The id of the BGP process running in the device. If
the value is 0 it means no BGP process is running on the device.

BGP Address Family Information

Address Family—Unique identifier of the address family type.
VRF Name—Identifier of the VRF Name if the address family type is ipv4 vrf.
Auto Summary—Displays whether the automatic network number summarization
is enabled/disabled for the address family.
Synchronization—Displays whether the BGP synchronization with IGP is
enabled/disabled for the address family.
Note This field is applicable only for the ipv4 unicast and ipv4 vrf address families.
Default Metric—Displays the default metric value set for redistributed routes of
the address family.
Action
Modify Address Family—Clicking on the “Modify Address Family” button,
opens the BGP Address Family - Modify Address Family Parameters window.
Add/Remove Address Family—Clicking on the “Add/Remove Address Family”
button, opens the Configure Address Family window.
Configuring Address Family
The Configure Address Family window allows the user to create or remove BGP
address families. To add or remove a BGP address family, proceed as follows:
Step1 Open the BGP Address-Family Configuration window. See “Viewing the
AF-General Tab on the BGP Address-Family Configuration Window” section on
page 14-38 for further details. Click on the AF-General Tab.