Cisco Systems 10720, 12000 Viewing the AF-Network Tab on the BGP Address-Family

Chapter14 Routing

BGP Address Family Configuration

14-46

Cisco 12000/10720 v3.2 Router Manager User Guide

OL-6690-01

Address Family—Unique identifier of the address family type

VRF Name—Identifier of the VRF Name if the address family type is IPv4 VRF

Auto Summary—This is used to enable/disable the automatic network number

summarization for the address family.

Default Metric—This is used to set the value for the redistributed routes for the

address family.

Note This attribute is not configurable only for the vpnv4 unicast address families. If

this attribute is set to zero, then the default metric is removed from the device for

that address family.

Synchronization—This is used to enable/disable the BGP synchronization with

IGP for the address family.

Note This field is applicable only for the ipv4 unicast and ipv4 vrf address families.

Viewing the AF-Network Tab on the BGP Address-Family

Configuration Window

The AF-Network tab displays the network paths and the associated path

information for the BGP address family. The user can add or remove network

paths for an address family. To view the AF-Network tab on the BGP

Address-Family Configuration window for a chassis, proceed as follows:

Step1 Open the BGP Address-Family Configuration window. See “Viewing the

AF-General Tab on the BGP Address-Family Configuration Window” section on

page 14-38 for further details.

Step2 Click on the AF-Network tab.