Cisco Systems 3800 Series warranty AIM Installed on a Motherboard

AIM Installation and Removal

Figure 59

AIM end

Locking end

Plastic Standoff Orientation

82620

Step 5 Insert the connector on the AIM into the connector on the motherboard. Press firmly on the AIM until it seats onto the connector. The plastic standoff must snap into the hole in the AIM board. See Figure 60.

Step 6 Insert the machine-thread metal screws from the accessory kit through the AIM into the metal standoffs. See Figure 60. Carefully tighten the screws with a number 1 Phillips screwdriver.

Step 7 Check that the AIM is installed correctly on the motherboard. See Figure 60.

Figure 60 AIM Installed on a Motherboard

58696

Installing and Upgrading Internal Components in Cisco 3800 Series Routers

92 OL-5975-04