Connecting WAN, LAN, and Voice Cables
Figure 20 RPS Connector on Cisco 3825 Router
FLASH | 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| 0 |
|
|
|
|
|
|
|
| SYS | AUX |
|
|
|
|
|
|
|
| ACT | RPS | IP |
|
|
| |
|
|
|
|
| PWR AIM0 | AIM1 | PV |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| DM0 PVDM1 | PVDM2 PVDM3 |
|
|
|
|
|
|
|
|
RPS connector
Figure 21 Connecting RPS to Cisco 3825 Router
121273
C | MPACT FLASH | 1 |
|
|
|
|
|
|
|
|
|
| 0 | SYS |
| SYS |
|
|
|
|
|
|
|
| ACT |
|
|
|
|
| ||
|
|
|
|
| PWR | RPS | AUX |
|
|
|
|
|
|
|
|
|
| PWR | AIM0 AIM1 |
|
|
|
|
|
|
|
|
|
| PVDM0 PVDM1 |
| |
|
|
|
|
|
|
|
|
| PVDM2 PVDM3 | |
|
|
|
|
|
|
|
|
|
|
121292
Connecting WAN, LAN, and Voice Cables
This section describes how to connect WAN, LAN, and voice interface cables to your Cisco 3800 series integrated services router.
One Ethernet cable is provided with the router for a Gigabit Ethernet connection. These ports use Category 5, 5e, or 6 UTP
Connect each WAN, LAN, or voice cable to the appropriate connector on the router or on a network module or interface card, following these precautions:
•Position the cables carefully, so that they do not put strain on the connectors.
•Organize cables in bundles so that they do not tangle.
•Inspect the cables to make sure that the routing and bend radiuses are satisfactory. Reposition cables if necessary.
•Install cable ties in accordance with site requirements.
Cable connections to network modules and interface cards are described in detail in the following documents:
•Cisco Network Modules Hardware Installation Guide
•Cisco Interface Cards Installation Guide
Connecting Cables to Cisco 3800 Series Routers
28 |
| |
|
