Cisco Systems 3800 Series warranty 121385

Installing and Removing Slot Dividers

Figure 34 Inserting Slot Divider into Network Module Slot (Generic Router)

1

121385

2

1

Insert slot divider

2

Tighten screw so front surface is flush with router rear panel

Step 2 Push the slot divider into the slot. The slot divider’s screw tip and guide pin fit into holes at the back of the slot. Use the number 1 Phillips screwdriver to tighten the attachment screw. When it is fully seated, the slot divider’s front surface is flush with the router’s rear panel. See Figure 34.

Step 3 Pull gently on the slot divider to check that it is seated securely.

Installing Network Modules in Cisco 3800 Series Routers

OL-5973-01 57