19
Avaya Definity Gx/PBXLink Integration Guide for CiscoUnity 4.0
OL-3105-15
Avaya Definity Gx/PBXLink Integration Guide for CiscoUnity 4.0 Setting Up the PBXLink Box
Step17 On the PBX Options menu, press the Up or Down arrow to select Configure Port A and press OK.
Step18 On the Configure Port A menu, press the Left or Right arrow to select Calls Only and press OK.
Step19 If you are setting up a PBXLink-24 box, continue to Step20.
If you are setting up a PBXLink-48 box, do the following substeps:
a. On the PBX Options menu, press the Up or Down arrow to select Configure Port B and press OK.
b. On the Configure Port B menu, press the Right or Left arrow to select Calls Only and press OK.
Step20 On the PBX Options menu, press the Up or Down arrow to select Prime Number and press OK.
Step21 In the Prime Number field, enter the pilot number that the phone system uses to call CiscoUnity, and
press OK.
Step22 On the PBX Options menu, press the Up or Down arrow to select Extension Length and press OK.
Step23 In the Extension Length field, enter the number of digits in the subscriber extensions and press OK. If
the subscriber extensions have different lengths, enter the number of digits in the longest extension.
Step24 On the PBX Options menu, press Cancel.
Step25 On the Configuration menu, press the Up or Down arrow to select Integration and press OK.
Step26 On the Integration menu, press the Right or Left arrow to select Started and press OK.
If the system has two or more PBXLink digital ports, we recommend that you balance the load among
the PBXLink boxes by setting up the Port LTNs for random operation. Depending on the number of
PBXLink digital ports and the number of PBXLink boxes that your system uses, do the applicable
procedure that follows.
To Set Up the Port LTNs for Two PBXLink Digital Ports on One PBXLink Box
Step1 Confirm that the PBXLink Integration option is set to Stopped by doing the following substeps:
a. On the main menu, press the Up or Down arrow to select Configuration and press OK.
b. On the Configuration menu, press the Up or Down arrow to select Integration.
c. Confirm that the Integration option is set to Stopped.
If the Integration option is set to Started, press OK, press the Right or Left arrow to select Stopped,
and press OK.
Step2 On the Configuration menu, press the Up or Down arrow to select SMDI Options and press OK.
Step3 On the SMDI Options menu, press the Up or Down arrow to select Port A LTNs, and press OK.
Step4 On the Port A LTNs menu, press the Up or Down arrow to select Mode of Operation and press OK.
Step5 On the Mode of Operation menu, press the Right or Left arrow to select Random and press OK.
Step6 On the Port A LTNs menu, press the Up or Down arrow to select Setup Random LTNs and press OK.
Step7 In the Setup Random LTNs field, enter the voice messaging port values (not the extension) for each
odd-numbered voice messaging port as shown in the following table, and press OK.