Cisco Systems 4 - page 22

22
Avaya Definity Gx/PBXLink Integration Guide for CiscoUnity 4.0
OL-3105-15
Avaya Definity Gx/PBXLink Integration Guide for CiscoUnity 4.0
Setting Up the PBXLink Box
Step16 On the Port A LTNs menu, press the Up or Down arrow to select Mode of Operation and press OK.
Step17 On the Mode of Operation menu, press the Right or Left arrow to select Random and press OK.
Step18 On the Port A LTNs menu, press the Up or Down arrow to select Setup Random LTNs and press OK.
Step19 In the Setup Random LTNs field, enter the voice messaging port values (not the extension) for each
even-numbered voice messaging port as shown in the following table, and press OK.
Step20 After all the even-numbered voice messaging ports are set, press Cancel.
Step21 On the Port A LTNs menu, press Cancel.
Step22 On the SMDI Options menu, press Cancel.
Step23 On the Configuration menu, press the Up or Down arrow to select Integration and press OK.
Step24 On the Integration menu, press the Right or Left arrow to select Started, and press OK.
Step25 Continue to the “Creating a New Integration with the Avaya Definity/PBXLink Phone System” section
on page 29.
To Set Up the Port LTNs for Three PBXLink Digital Ports (One PBXLink Box with One Digital Port and One PBXLink
Box with Two Digital Ports)
This procedure sets up the port LTNs for every third voice messaging port when the first PBXLink box
uses only Port A, and the second PBXLink box uses Port A and Port B.
Step1 On the first PBXLink box (which has one digital port), confirm that the PBXLink Integration option is
set to Stopped by doing the following substeps:
a. On the main menu, press the Up or Down arrow to select Configuration and press OK.
b. On the Configuration menu, press the Up or Down arrow to select Integration.
c. Confirm that the Integration option is set to Stopped.
If the Integration option is set to Started, press OK, press the Right or Left arrow to select Stopped,
and press OK.
Step2 On the Configuration menu, press the Up or Down arrow to select SMDI Options and press OK.
Step3 On the SMDI Options menu, press the Up or Down arrow to select Port A LTNs, and press OK.
Step4 On the Port A LTNs menu, press the Up or Down arrow to select Mode of Operation and press OK.
Step5 On the Mode of Operation menu, press the Right or Left arrow to select Random and press OK.
Step6 On the Port A LTNs menu, press the Up or Down arrow to select Setup Random LTNs and press OK.
Table21 Random LTN Settings for Even-Numbered Ports
LTN Number Voice Messaging Port Value
00002
10004
20006
.
.
.
<the remaining even-numbered voice messaging ports>