Cisco Systems 7941G/7941G-GE warranty Starting and Joining a Standard Conference, Press ConfList

Basic Call Handling

See the “Starting and Joining a Standard Conference” section on page 31 for additional instructions.

Meet-Me Conference Calls

You can create a Meet-Me conference by calling the Meet-Me phone number at a specified time.

See the “Starting or Joining a Meet-Me Conference Call” section on page 33 for additional instructions.

Starting and Joining a Standard Conference

A standard conference allows at least three people to participate in a single call.

If you want to... Then...

•Create a conference by 1. From a connected call, press Confrn. (You may need to press the

calling participants more softkey to see Confrn.)

•Add new participants to 2. Enter the participant’s phone number.

an existing conference	3.	Wait for the call to connect.
	4.	Press Confrn again to add the participant to your call.
	5.	Repeat to add additional participants.
Create a conference by joining 1. Make sure that you have two or more calls on a single line.
two or more existing calls	2.	Highlight a call that you want to add to the conference.
	3.	Press Select.
		The selected call displays this icon	.
	4.	Repeat this process for each call that you want to add.
	5.	From one of the selected calls, press Join. (You may need to press
		the more softkey to see Join.)
	Note The active call is automatically selected.
Participate in a conference	Answer the phone when it rings.
Create a conference by	Highlight a call on a shared line and press cBarge. (You may need to
barging a call on a shared line	press the more softkey to display cBarge.)
	See the “Using a Shared Line” section on page 36.
View a list of conference	1. Highlight an active conference.
participants	2.	Press ConfList.
	Participants are listed in the order in which they join the conference
	with the most recent additions at the top.
Get an updated list of	While viewing the conference list, press Update.
participants
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified CallManager 5.0 (SCCP)				31