Cisco Systems CCNA 2 manual IV. Case Study, Overview and Objectives

IV. Case Study

Overview and Objectives

This case study allows students to complete a network design, implementation, and troubleshooting project using the skills gained in CCNA 2. Students will use the skills that have already been developed to use, make, and connect the proper cabling to the appropriate devices.

It is crucial to read and understand the scenarios to make sure that all requirements are fulfilled. Each scenario guides the student through the proper steps to ensure that the project is completed properly.

This case study requires the student to accomplish the following tasks:

•Set up the physical layout of the network using the diagram and accompanying narrative

•Correctly configure the routers with a basic router configuration

•Set up a TFTP server on one of the workstations

•Create and apply access control lists on the appropriate router(s) and interface(s)

•Troubleshoot and test all connectivity and access control lists

•Provide detailed documentation in a prescribed form, as listed in the deliverables section

130 - 238 CCNA 2: Routers and Routing Basics v3.1 Instructor Guide – Case Study Copyright ♥ 2004, Cisco Systems, Inc.