Cisco Systems CCNA 2 manual Web Links

•Implement advanced IP address management techniques

•Configure and test the EIGRP, OSPF, and BGP routing protocols, which help make most enterprise Intranets and the Internet possible

The required lab equipment for CCNP 2 includes workstations, routers, switches, and a WAN simulator. CCNP 2 students acquire lab skills such as the following:

•WAN design

•Dial-up, point-to-point, ISDN, Frame Relay, and X.25 WAN protocol configuration and testing

•Basic network security

The required lab equipment in CCNP 3 includes workstations, hubs, switches, and routers. CCNP 3 students acquire lab skills such as the following:

•Switch and VLAN configuration

•Multilayer switching and redundancy technology implementation

•Campus LAN design

Required lab equipment for CCNP 4 includes workstations, routers, switches, and a WAN simulator. CCNP 4 students acquire lab skills and the ability to troubleshoot the following:

•LANs

•WANs

•Switches

•Routers

•TCP/IP Protocols

•Routing Protocols

Standard and premium lab bundles are available. A variety of optional bundles are also available. The student-to-equipment ratio should be as low as possible.

Web Links

Cisco Networking Academy Program: http://cisco.netacad.net

183 - 238 CCNA 2: Routers and Routing Basics v3.1 Instructor Guide – Appendix B Copyright ♥ 2004, Cisco Systems, Inc.