Cisco Systems CCNA 2 manual Case Study Instructor Sample Outputs

Case Study – Instructor Sample Outputs

Phase 5: Documenting the Network – Sample outputs Boaz (2500)

Configuration Management documentation – Boaz (2500)

Boaz#show cdp neighbors

Capability Codes: R - Router, T - Trans Bridge, B - Source Route

Bridge

S - Switch, H - Host, I - IGMP

Device ID	Local	Intrfce	Holdtme	Capability Platform Port ID
Centre	Ser 0	120	R	2500 Ser 0

Boaz#show ip route

Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B -

BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default

U - per-user static route

Gateway of last resort is not set

172.16.0.0/16 is subnetted, 4 subnets

I172.16.128.0 [100/10476] via 172.16.64.1, 00:00:20, Serial0 I 172.16.32.0 [100/8576] via 172.16.64.1, 00:00:20, Serial0 C 172.16.96.0 is directly connected, Ethernet0

C 172.16.64.0 is directly connected, Serial0

Boaz#show ip protocols Routing Protocol is "igrp 11"

Sending updates every 90 seconds, next due in 34 seconds Invalid after 270 seconds, hold down 280, flushed after 630 Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Default networks flagged in outgoing updates

Default networks accepted from incoming updates IGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0 IGRP maximum hopcount 100

IGRP maximum metric variance 1 Redistributing: igrp 11 Routing for Networks: 172.16.0.0

Routing Information Sources:

Gateway Distance Last Update

172.16.64.1100 00:00:37

Distance: (default is 100)

141 - 238 CCNA 2: Routers and Routing Basics v3.1 Instructor Guide – Case Study Copyright ♥ 2004, Cisco Systems, Inc.