Cisco Systems CCNA 2 manual Phase 3 Basic Router and Workstation Configuration, Boaz Center

Phase 3: Basic Router and Workstation Configuration

After the team leader inspects the prototype cabling, the technician is assigned to create a basic configuration on the router and workstations.

Use the diagram and planning sheets to create a basic configuration for the router. The checklist below will help keep track of the configuration process.

Boaz Center Eva

Hostname

Console Password

Secret Password

VTY Password

Serial 0/0 IP address

Serial 0/1 IP address

*Serial 0/0 Clock Rate

*Serial 0/1 Clock Rate

Fa 0/0 IP address

Fa 0/1 IP address

Enable the interfaces

Add Routing Protocol

Add Network

Statements

Note *: As needed

Table continued on next page

133 - 238 CCNA 2: Routers and Routing Basics v3.1 Instructor Guide – Case Study Copyright ♥ 2004, Cisco Systems, Inc.