Cisco Systems IE301024TC manual Attaching Brackets for IP-30 Compliance Optional

Chapter 2 Switch Installation

Installing the Switch

Attaching Brackets

Figure 2-11 Attaching 19-inch Rack Brackets

1

SwitchSeries	CiscoIE3010
	208368

1

Phillips truss-head screws

Attaching Brackets for IP-30 Compliance (Optional)

Step 1 Insert the rubber plugs in the appropriate holes. See Figure 2-12. Follow the same procedure on the other side of the switch.

Note The rubber plugs are not supplied with the switch. You can order a kit (part number

IE-3010-IP30KIT) containing the rubber plugs.

Step 2 Use a screwdriver or pen to completely push in the rubber plugs. See Figure 2-3.

Step 3 Install the brackets on both sides of the switch. See Figure 2-13.

Cisco IE 3010 Switch Hardware Installation Guide

2-16 78-19581-02