Cisco Systems IE301024TC manual Power Supply Installation, Power-Supply Modules

C H A P T E R 3

Power Supply Installation

This chapter describes how to remove and install a new or replacement power supply. Your switch ships with at least one installed power-supply module (AC or DC, depending on your order).

The power-supply modules are field-replaceable units (FRUs) and are hot-swappable.

For translations of the safety warnings in this chapter, see the Regulatory Compliance and Safety Information for the Cisco IE 3010 Switch on the documentation CD and also on Cisco.com.

•Power-Supply Modules, page 3-1

•Installation Guidelines, page 3-3

•Grounding the Switch, page 3-4

•Installing the Power-Supply Module in the Switch, page 3-6

•Wiring the Power Source, page 3-7

•Removing the Power-Supply Module, page 3-12

Power-Supply Modules

For information on the power-supply modules, see the “Power Supply Features” section on page 1-14.

Table 3-1 Power-Supply Modules

Model	Description
PWR-RGD-LOW-DC/IA	Low-voltage DC. For voltage information, see Table A-6 on page A-4.
PWR-RGD-AC-DC/IA	High-voltage AC or DC. For voltage information, see Table A-5 on
	page A-4.

Cisco IE 3010 Switch Hardware Installation Guide

78-19581-02 3-1