C H A P T E R 1
Product Overview
The Cisco ME 4924-10GE Ethernet switch, also referred to as the switch, is a metro Ethernet switch that can be used as user facing provider edge aggregation equipment to connect to service provider customer routers, switches, or other devices. This chapter provides a functional overview of the switch:
•Front Panel Description, page 1-3
•Management Options, page 1-8
Features
The switch can be deployed as a broadband aggregation switch, aggregating 1000BASE-X SFP Ethernet traffic from other network devices to 10-Gigabit uplinks. The Cisco ME 4924-10GE switch has a
48-Gbps, nonblocking, full-duplex switching fabric, providing 102 million packets-per-second of switching capacity for high-speed applications.
A removable automatic variable speed fan tray for low noise operation at room temperature and removable and redundant 300 W AC or 300 W DC power supplies provide fault-tolerance protection for the switch. A faulty fan tray may be removed and replaced with a new one without taking the switch out of service. You may also replace a faulty power supply while the redundant supply provides uninterrupted power to the switch.
The following sections describe the switch features.
Hardware Features
The Cisco ME 4924-10GE hardware provides:
•24 small form-factor pluggable (SFP) module ports usable as downlinks
•4 SFP ports usable as uplinks or downlinks
For information about port numbering, see the “Front Panel Description” section on page 1-3
•2 power supply bays that support AC or DC input and power redundancy
For instructions on installing power supply units, see Chapter 3, “Connecting the Power Supply.”
•Layer 2, Layer 3, and Layer 4 switching services
•Two 10-Gigabit Ethernet uplink ports using X2 interfaces
Cisco ME 4924-10GE Ethernet Switch Hardware Installation Guide
