Cisco Systems ME 4924-10GE manual Installation Guidelines, Verifying Package Contents

Chapter 2 Switch Installation

Preparing for Installation

Warning This unit might have more than one power supply connection. All connections must be removed to de-energize the unit. Statement 1028

Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Statement 1030

Warning Ultimate disposal of this product should be handled according to all national laws and regulations.

Statement 1040

Warning When installing or replacing the unit, the ground connection must always be made first and disconnected last. Statement 1046

Warning No user-serviceable parts inside. Do not open. Statement 1073

Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074

Caution To comply with the Telcordia GR-1089 Network Equipment Building Systems (NEBS) standard for electromagnetic compatibility and safety, connect the Ethernet cables only to intrabuilding or unexposed wiring or cabling.

Note For a list of EMC regulatory statements, see the Regulatory Compliance and Safety Information for the Cisco ME 4924-10GE Ethernet Switch.

Installation Guidelines

Installation instructions and cabling distances vary from module to module. Refer to the information at http://www.cisco.com/en/US/products/hw/modules/ps5455/prod_installation_guides_list.html as it applies to your site.

Verifying Package Contents

Note Carefully remove the contents from the shipping container, and check each item for damage. If any item is missing or damaged, contact your Cisco representative or reseller for support. Return all packing material to the shipping container, and save it.

Cisco ME 4924-10GE Ethernet Switch Hardware Installation Guide

OL-10071-01 2-3