Preface
Audience
This guide is for the networking or computer technician responsible for installing the Cisco ME
Purpose
This guide documents the hardware features of the Cisco ME
This guide does not describe system messages that you might receive or how to configure your switch. For more information, refer to the switch software configuration guide, the switch command reference, and the switch system message guide on the Cisco.com Product Documentation home page. For information about the standard Cisco IOS Release 12.2 commands, refer to the Cisco IOS documentation set from the Cisco.com home page at Service and Support > Technical Documents. On the Cisco Product Documentation home page, select Release 12.2 from the Cisco IOS Software
Organization
This guide is organized into these chapters:
Chapter 1, “Product Overview,” is a physical and functional overview of the switch. This chapter describes the switch ports, the standards they support, and the switch LEDs.
Chapter 2, “Switch Installation,” has the procedures on how to power the switch, how to install the switch on a wall, a table, or a shelf, stack the switches, install the switch in a rack, on a wall, on a table, or shelf,, and how to make port connections.
Chapter 3, “Connecting the Power Supply,” describes how to connect the AC and DC power supply units and how to remove the units.
Chapter 4, “Troubleshooting,” describes how to identify and resolve some of the problems that might arise when installing the switch.
Appendix A, “Technical Specifications,” lists the physical and environmental specifications for the switches and the regulatory agency approvals.
Cisco ME
| vii | |
|
