Cisco Systems OL-5532-02 manual The Template DataFile Chooser

Chapter 4 Remote Access VPN Services

Creating Remote Access VPN Service Requests

Figure 4-32 The Template DataFile Chooser Page

Step 8 The templates are in the left column and the associated data files are on the right. Choose a folder of templates or a single template by highlighting it. The page updates and displays the associated templates on the right side of the page.

Note If you are using a Sybase repository, sample templates are pre-populated in the embedded, empty repository that is shipped with your ISC software. These templates appear in the right side pane of the Template Manager window (which is directly accessible through Service Design > Template Manager). If you are using an Oracle repository, the new, empty repository for use with your ISC software is created during installation and, consequently, the sample templates are not pre-populated and will not appear in the Template Manager window. For information on adding templates to your repository, refer to the Cisco IP Solution Center Infrastructure Reference, 3.2.

Step 9 Check the box next to the templates you want to add to the CPE device configuration. To view the configlets for a template, check the box next to the template and click View.

Step 10 Click Accept to return to the Add/Remove Templates dialog box.

Cisco IP Solution Center Integrated VPN Management Suite Security User Guide, 3.2

4-30 OL-5532-02