Cisco Systems OL-5532-02 Defining the VPN 3000 L2TP Parameters, Control, Start Time, End Time

Chapter 4 Remote Access VPN Services

Creating Remote Access VPN Policies

Step 2 Follow the instructions in Table 4-9to enter values for each day of the week.

Table 4-9 Remote Access VPN Policy – Access Hours Fields

Field Name		Type	Instructions
Name		text box	Enter a name to identify the access hours assigned to this group.
Control		drop-down	There are two control options:
		list	• during – Allow access during the hours in the specified range (default).
			• except – Allow access except during the hours in the specified range.
Start Time		text box in	Enter starting time of the access time range.
		time format
End Time		text box in	Enter ending time of the access time range.
		time format
Step 3	Click Next to continue to the VPN 3000 L2TP page as described in the “Defining the VPN 3000 L2TP
	Parameters” section on page 4-21.

Defining the VPN 3000 L2TP Parameters

L2TP provides tunneling of PPP. An L2TP session defines the communications transactions between the LAC and the LNS that support tunneling of a single PPP connection. For further information on VPN 3000 L2TP parameters, refer to the VPN 3000 online help.

If you selected the L2TP over IPsec option in the Tunneling Protocols field, you must set values for the parameters in this section.

Step 1 The Remote Access VPN Policy – VPN 3000 L2TP Editor page appears as shown in Figure 4-21.

Cisco IP Solution Center Integrated VPN Management Suite Security User Guide, 3.2

OL-5532-02 4-21