Chapter1 Controlling CSS Access
Controlling CSS Network Traffic Through Access Control Lists
1-22
Cisco Content Services Switch Security Configuration Guide
OL-5650-02
source_port The source port for the traffic. If you do not designate a
source port, this clause allows traffic from any port
number. Enter one of the following:
•eq port is equal to the port number.
•lt port is less than the port number.
•gt port is greater than the port number.
•neq port is not equal to the port number.
•range low high for a range of port numbers, inclusive.
Enter numbers from a range of 1 to 65535. Separate the
low and high number with a space.
destination_info The destination information for the traffic. Enter one of the
following:
•destination any for any combination of destination
information.
•destination content owner_name/rule_name for an
owner content rule. Separate the owner and rule name
with a / character.
•destination ip_address (for the destination IP address
and optional subnet mask IP address. Include subnet
mask as IP address only; no Classless Inter-domain
routing (CIDR) address.
•destination hostname for the destination host name.
To use a hostname, configure the CSS DNS client first
to enable the CSS to translate the host name.
•nql nql_name for an existing NQL consisting of host
IP addresses. Enter the name of the NQL.
Table1-2 Clause Command Options (conti nued)
Variables and
Options Parameters