1-23
Cisco Content Services Switch Security Configuration Guide
OL-5650-02
Chapter1 Controlling CSS Access
Controlling CSS Network Traffic Through Access Control Lists
destination_port The destination port. Enter one of the following. You may
use a port number or port name with the options.
•eq port is equal to the port number.
•lt port is less than the port number.
•gt port is greater than the port number.
•neq port is not equal to the port number.
•range low high for a range of port numbers, inclusive.
Enter numbers from a range of 1 to 65535. Separate the
low and high number with a space.
•port names:
–
https = Port 443 Https
–
ldap = Port 389 Ldap
–
bgp = Port 179 Bgp
–
ntp = Port 123 Ntp
–
nntp = Port 119 Nntp
–
pop = Port 110 Pop
–
http = Port 80 Http,
–
gopher = Port 70 Gopher
–
domain = Port 53 Domain
–
smtp = Port 25 Smtp
–
telnet = Port 23 Telnet,
–
ftp = Port 21 Ftp
–
ftp-data = Port 20 Ftp-data
–
none = None
If you do not define a destination port, this clause allows
traffic to any port.
Table1-2 Clause Command Options (conti nued)
Variables and
Options Parameters