Cisco Systems manual Card, ONS 15600 SONET/SDH, ONS-SE-2G-L2, ONS-SE-Z1

Chapter 2 Card Reference

2.8.10 SFP Modules

Table 2-22lists the SFPs (PPMs) that are compatible with the ASAP card.

Caution Use only SFPs certified for use in Cisco Optical Networking Systems. The qualified Cisco SFP pluggable module’s top assembly numbers (TANs) are provided in Table 2-22.

Table 2-22 SFP Compatibility

Card

ASAP 4PIO only

(ONS 15600 SONET/SDH)

Compatible SFP
(Cisco Product ID)	Cisco Top Assembly Number (TAN)
ONS-SE-2G-L2	10-2013-01
ONS-SE-Z1	10-1971-01
ONS-SI-622-L2	10-1936-01
ONS-SI-155-L2	10-1937-01
ONS-SC-2G-46.1 through 60.6	10-2170-01 through 10-2184-01, and 10-2186-01
ONS-SC-2G-30.3 through 44.5	10-2155-01 through 10-2169-01, and 10-2185-01

To determine the line rates supported by each SFP/XFP, see the “A.3 SFP/XFP Specifications” section on page A-12.

SFPs are integrated fiber optic transceivers that provide high-speed serial links from a port or slot to the network. Various latching mechanisms can be used on the SFP/XFP modules. There is no correlation between the type of latch and the model type (such as SX or LX/LH) or technology type (such as Gigabit Ethernet). See the label on the SFP/XFP for technology type and model. One type of latch available is a Mylar tab as shown in Figure 2-12, a second type of latch available is an actuator/button (Figure 2-13), and a third type of latch is a bail clasp (Figure 2-14).

SFP dimensions are:

•Height 0.03 in. (8.5 mm)

•Width 0.53 in. (13.4 mm)

•Depth 2.22 in. (56.5 mm) SFP temperature ranges for are:

•COM—Commercial operating temperature range –5 to 70 degrees C

•EXT—Extended operating temperature range –5 to 85 degrees C

•IND—Industrial operating temperature range –40 to 85 degrees C

Figure 2-12 Mylar Tab SFP

63065

Cisco ONS 15600 Reference Manual, R7.2

2-26