Cisco Systems PA-T3 manual Router# show interfaces serial 2/0

Checking the Configuration

The following example of the show interfaces type slot/port command shows all of the information specific to the serial PA-T3 port (interface port 0) in port adapter slot 2:

router# show interfaces serial 2/0

Serial2/0 is up, line protocol is up Hardware is M1T-T3 pa

MTU 4470 bytes, BW 44210 Kbit, DLY 200 usec, rely 255/255, load 1/255 Encapsulation HDLC, loopback not set, keepalive not set

Last input 00:00:01, output 00:00:03, output hang never Last clearing of "show interface" counters never

Input queue: 0/75/0 (size/max/drops); Total output drops: 0

Queueing strategy: weighted fair

Output queue: 0/64/0 (size/threshold/drops) Conversations 0/1 (active/max active)

Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

18958 packets input, 4172738 bytes, 0 no buffer Received 5073 broadcasts, 0 runts, 0 giants

0 parity

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 18294 packets output, 4552579 bytes, 0 underruns

0 output errors, 0 applique, 0 interface resets

0 output buffer failures, 0 output buffers swapped out

1 carrier transitions

rxLOS inactive, rxLOF inactive, rxAIS inactive txAIS inactive, rxRAI inactive, txRAI inactive

router#

For a VIP2, the show interfaces type slot/port-adapter/portcommand displays status information (including the physical slot and port address) for the interfaces you specify. In this example, a one-port PA-T3 serial port adapter-configured VIP2 is in chassis slot 10, in port adapter slot 0.

router# show interfaces serial 10/0/0 Serial10/0/0 is up, line protocol is up

Hardware is cyBus PODS3 Serial

MTU 4470 bytes, BW 44210 Kbit, DLY 200 usec, rely 255/255, load 1/255 Encapsulation HDLC, loopback not set, keepalive not set

Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Queueing strategy: fifo

Output queue 0/40, 0 drops; input queue 0/75, 0 drops 5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

14771 packets input, 3032919 bytes, 0 no buffer Received 2664 broadcasts, 0 runts, 0 giants

0 parity

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 15775 packets output, 2808513 bytes, 0 underruns

0 output errors, 0 applique, 0 interface resets

0 output buffer failures, 0 output buffers swapped out

1 carrier transitions

rxLOS inactive, rxLOF inactive, rxAIS inactive txAIS inactive, rxRAI inactive, txRAI inactive

router#

8-16PA-T3 Serial Port Adapter Installation and Configuration