Cisco Systems WIP300 manual Using the Wireless-G IP Phone

Wireless-G IP Phone

Using the Wireless-G IP Phone

To make a call, enter the phone number you want to dial, then press the Call button. To answer an incoming call, press the Accept Soft Key or the Call button. When you’re on a phone call, you can select the following options:

Hold	Press the Hold Soft Key to place a call on hold. To return to the call, press
	the Resume Soft Key.
Mute	Press the Navigation button to mute the Phone’s microphone. To unmute
	the Phone’s microphone, press the Navigation button again.
OnHook	Press the OnHook Soft Key to end a call.
	Move the Navigation button up or down to adjust the call volume, then
Volume	press the Navigation button to save the new volume level or the Back Soft
	Key to cancel.

For additional information about your Wireless-G IP Phone, proceed to “Chapter 4: Configuring the Wireless-G IP Phone.”

22	Chapter 3: Installing and Using the Wireless-G IP Phone
	Using the Wireless-G IP Phone