CBM-270 User’s Manual
Conform to the following Standards
LVD : EN60950 : A4
EMC : EN55022 : 1994 Class A
: EN61000-3-2 : 1995
: EN50082-1 : 1992
: IEC801-2 : 1991 4KV CD, 8KV AD
: IEC801-3 : 1984 3V/m, 26MHz-1000MHz AM1KHz 80%
: IEC801-4 : 1988 ±0.5KV Signal Line ±1KV AC mains
Supplementary Information
“The product complies with the requirements of the Low Voltage Directive 73/23/EEC, 93/68/EEC and
the EMC Directive 89/336EEC, 92/31/EEC, 93/68EEC”
Place Tokyo, Japan Signature
Date July.1998
Full Name : Mikio Moriya
Position : General Manager
R & D Department
Europe Contact :
Norco Declaration AB
Box 7146 S-250 07 Helsingborg Sweden
Warning
This is a Class A products. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
This declaration is applied only for 230V model.
IMPORTANT SAFETY INSTRUCTIONS•Read all of these instructions and save them for future reference.
•Follow all warnings and instructions marked on the product.
•Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a
damp cloth for cleaning.
•Do not use this product near water.
•Do not place this product on an unstable cart, stand or table. The product may fall, causing serious
damage to the product.
•Slots and openings on the back or bottom of the case are provided for ventilation. To ensure reliable
operation of the product and to protect it from overheating, do not block or cover these openings. The
openings should never be blocked by placing the product on a bed, sofa, rug of other similar surface.
This product should never be placed near or over a radiator or heater. This product should not be placed
in an built-in installation unless proper ventilation is provided.
•This product should be operated from the type of power source indicated on the marking label. If you re