Citizen Systems CBM-270 GS FF (Only When Label Printer is Selected)

CBM-270 User’s Manual
[Outline] This command prints the data in the printer buffer and searches for the head of the next label.
[Caution] This command is valid only when the label printer is selected with DS1-5. It is ignored when
the thermal paper is specified. After sending one label worth of print data, be sure to send
this command or GS FF command. After the user intentionally moved the label paper, this
command cannot search for the head of the label properly.
[See Also] GS FF, GS <
[Sample Program] [Print Result]
LPRINT "ABC" ; CHR$ (&HA) ;
LPRINT "123" ; CHR$ (&HC) ;
LPRINT "HHHHH" ; CHR$ (&HA) ;
LPRINT "gggg" ; CHR$ (&HC) ;
END
GS FF (Only When Label Printer is Selected)
[Function] Printing and discharging the label(Cutting included)
[Code] <1D>H<0C>H
[Outline] This command prints the data in the printer buffer and cuts and discharges the label. If this
command is executed, the printer will discharge the label to the cutting position and flicker
the PAPER lamp to stop. After cutting the label, press the FEED switch to search for the
head of the next label.
[Caution] This command is valid only when the label printer is selected with DS1-5. It is ignored when
the thermal paper is specified. After sending one label worth of print data, be sure to send
this command or FF command. After the user intentionally moved the label paper, this
command can not search for the head of the label properly.
[See Also] FF, GS <