CBM-270 User’s Manual
ESC c 5 n
[Function] | Enabling/Disabling the panel switches | |||
[Code] | <1B> H <63> H <35> H <n> | |||
[Range] | 0 ≤ n ≤ 255 |
|
| |
[Outline] | Selecting the LF switch valid/invalid. | |||
| ∙ "n" is valid only in the lowest bit (n0). | |||
| ∙ "n" bit means the followings. | |||
|
|
|
|
|
| n0 |
| Condition |
|
| 0 |
| LF SW valid. |
|
| 1 |
| LF SW invalid. |
|
[Caution] | When the panel switch is disabled with this command, the LF switch is disabled. Therefore, | |||
| the paper cannot be fed by operating the LF switch. | |||
[Default] | n = 0 |
|
| |
[Sample Program] |
|
| ||
| LPRINT CHR$ (&H1B) ; "c5" ; CHR$ (0) ; ∙∙∙∙∙∙∙∙ When enabling the LF switch | |||
| LPRINT CHR$ (&H1B) ; "c5" ; CHR$ (1) ; ∙∙∙∙∙∙∙∙ When disabling the LF switch | |||
ESC d n
[Function] | Printing and feeding the paper by n lines |
[Code] | <1B> H <64> H <n> |
[Range] | 0 ≤ n ≤ 255 |
[Outline] | Prints data inside the buffer and feeds paper by n lines. |
| ∙ Specified line does not remain. |
| ∙ The beginning of the line is to be considered as the next printing start position. |
[Default] | ∙ The initial value is not defined. |
[Sample Program]
LPRINT "AAAAA"
LPRINT CHR$ (&H1B) ; "d" ; CHR$ (2) ;
LPRINT "AAAAA" ; CHR$ (&HA) ;
END
[Print Results]
