CBM-270 User’s Manual
ESC & s n m [a [p] s×a] m−n+1
[Function] | Defining the download characters |
[Code] | <1B> H <26> H <s> <n> <m> [<a> <p1> <p2> … <ps×a>] |
[Range] | s = 3 |
| 32 ≤ n ≤ m ≤ 126 |
| 0 ≤ a ≤ 12 (Font A) |
| 0 ≤ a ≤ 9 (Font B) |
| 0 ≤ p1 … ps×a ≤ 255 |
[Outline] | Defines the font of download characters of alphanumeric characters. |
| ∙ "s" indicates the number of bytes in vertical direction. |
| ∙ "n" indicates the start character code and m the end character code. To define only one |
| character, set n=m. |
| ∙ Character codes definable includes 95 ASCII codes in total between 32∼126. |
| ∙ "a" indicates the number of dots in horizontal direction for definition. |
| ∙ "p" is the data to be defined, which indicate a pattern equal to "a" dot in horizontal |
| direction from the left end. The rest of the pattern on the right side is filled with space. |
| The rest of data to be defined is s x a. |
| ∙ Download characters thus defined remain valid until redefinition, ESC @ execution, GS * |
| execution, or power OFF is practiced. |
[Caution] | Download characters and download bit images can not be defined simultaneously. |
| Running this command clears the definition of the download bit image. |
[Default] | Same as the internal character set |
[Example] |
|
Create each data bit by setting "1" for a printed dot and "0" for an unprinted dot.
[Sample Program][Print Results]
See Sample Program and Print Results for ESC % on Page 50.
