CBM-270 User’s Manual
∙Control by the lowest bit (n0) is shown as follows:
n0 | Type |
0 | Canceling highlighting |
1 | Specifying highlighting |
∙This is effective to all characters.
∙Dot configuration of a highlighted character includes one extra dot added at its side.
[Caution] | ∙ The print result of Double printing and highlight character printing is completely same. |
[See Also] | ESC !, ESC G |
[Example] |
|
[Sample Program] | [Print Results] |
LPRINT CHR$ (&H1B) ; "E" ; CHR$ (0) ;
LPRINT "AAABBB" ; CHR$ (&HA) ;
LPRINT CHR$ (&H1B) ; "E" ; CHR$ (1) ;
LPRINT "AAABBB" ; CHR$ (&HA) ;
ESC G n
| [Function] |
| Specifying/Canceling double printing | ||||
| [Code] |
| <1B> H <47> H <n> | ||||
| [Outline] |
| Specifying/canceling the double printing. | ||||
|
|
| ∙ "n" is valid only for the lowest bit (n0). | ||||
|
|
| ∙ Control by n is shown as follows. | ||||
|
|
|
|
|
|
|
|
|
|
| n0 |
| Type |
|
|
|
|
| 0 |
| Canceling double printing |
|
|
|
|
| 1 |
| Specifying double printing |
|
|
|
| This is effective to all characters. | |||||
| [Caution] |
| ∙ The print result of Double printing and highlight character printing is completely same. | ||||
| [See Also] |
| ESC E |
|
|
| |
| [Sample Program] | [Print Results] | |||||
|
|
| LPRINT CHR$ (&H1B) ; "G" ; CHR$ (0) ; | ||||
|
|
| LPRINT "AAABBB" ; CHR$ (&HA) ; | ||||
|
|
| LPRINT CHR$ (&H1B) ; "G" ; CHR$ (1) ; | ||||
|
|
| LPRINT "AAABBB" ; CHR$ (&HA) ; | ||||
| ESC J n |
|
|
|
|
|
|
| [Function] |
| Printing and Feeding paper n/203 inch |
| |||
| [Code] |
| <1B> H <4A> H <n> | ||||
| [Range] |
| 0 ≤ n ≤ 255 |
|
|
| |
| [Outline] |
| Prints data inside the print buffer and feeds paper by n/360 inch. Since an actual mechanical | ||||
|
|
| pitch is 1/203 inch, it is internally converted approximate to the value specified with this | ||||
command.
∙ Specified volume does not remain.
∙ The beginning of the line is to be considered as the next printing start position. ∙ Initial value is not defined.
