|
|
|
|
|
|
[Range] | 0 ≤ n ≤ 255 |
|
[Outline] | The line feed rate per line is specified by n/360 inch. | |
| Since an actual mechanical pitch is 1/203 inch, it is internally converted approximate to the | |
| value specified with this command. |
|
[Default] | ∙The initial value is n = 60 (1/6 inch) (18H), being 4.23 mm line feed rate. | |
[Sample Program] | [Print Results] | |
| See Sample Program and Print Results for ESC 2 on Page 54. | |
ESC = n
[Function] | Data input control |
|
|
|
| ||
[Code] | <1B> H <3D> H <n> |
|
|
|
| ||
[Range] | 0 ≤ n ≤ 255 |
|
|
|
|
| |
[Outline] | Selecting equipment in which data input from the host is effective. | ||||||
| ∙ Each bit of n indicates as follows: |
|
|
| |||
|
|
|
|
|
|
|
|
| Bit |
| Equipment |
| Value |
| |
|
| 0 |
| 1 |
| ||
|
|
|
|
|
| ||
| 0 |
| Printer | Invalid |
| Valid |
|
| 1 |
| Not defined |
|
|
|
|
| 2 |
| Not defined |
|
|
|
|
| 3 |
| Not defined |
|
|
|
|
| 4 |
| Not defined |
|
|
|
|
| 5 |
| Not defined |
|
|
|
|
| 6 |
| Not defined |
|
|
|
|
| 7 |
| Not defined |
|
|
|
|
∙When the printer has not been selected, this printer abandons all the received data until it is selected by this command.
[Caution] | ∙ Even when the printer has not been selected, it can become BUSY state through printer | |
| operation. |
|
| ∙ When the printer is deselected, this printer discards all the data until it is selected with this | |
| command. |
|
[Default] | n = 1 |
|
[Sample Program] | [Print Results] | |
| LPRINT "AAAAA" ; |
|
| LPRINT CHR$ (&H1B) ; "=" ; CHR$ (0) ; |
|
| LPRINT "aaaaa" ; CHR$ (&HA) ; |
|
| LPRINT CHR$ (&H1B) ; "=" ; CHR$ (1) ; |
|
| LPRINT "AAAAA" ; CHR$ (&HA) ; |
|
