iDP3550/3551 User ’s Manual
ESC DC3 n
[Function] | Printing the message |
[Code] | <1B>H <13>H n |
[Range] | 1 ≤ n ≤ 10 |
[Function] | This command prints a message. If the value of n is specified beyond the range, or if the |
| message is not registered yet the message will not be printed. |
ESC "y" n | (Friction feed model) |
[Function] | Setting the print lines after paper near end detection |
[Code] | <1B>H<79>H n |
[Range] | 0 ≤ n ≤ 255 |
[Outline] | This command sets the number of print lines after paper near end detection. It stops |
| printing after printing n ⋅ 2 lines since detection of the paper near end, resulting in the paper |
| near end state (See 4.12 Operation Panel and Display of Error). The PE signal (parallel |
| interface only) changes when the paper near end is detected. |
[Caution] | This command is only valid if the paper near end is selected with ESC c4 n, the command to |
| select the paper near end sensor valid for print stop. |
[Default] | n = 0 |
110 | CITIZEN |
