Citizen Systems iDP3550, iDP3551 user manual Handling of the fan-fold paper, 5mm

iDP3550/3551 User ’s Manual

Handling of the fan-fold paper

1.iDP3550P can use the fan-fold paper of the 3 to 3.5 inches.

2.Change the position of the sprocket (pin tractor) as necessary when feeding the paper.

3.After feeding the paper, align it with the mark on the platen.

CAUTION : • Be sure to use the specified fan-fold paper.

•Use of unspecified paper may adversely affect print quality, printer service life, and so on.

4.The sprocket holes on 3-inch fan-fold paper may be positioned 6.35 mm or 5 mm from the edge of the paper. Note the following when feeding 3-inch fan-fold paper.

CAUTION : • 6.35mm

When feeding paper with sprocket holes positioned 6.35 mm from the edge, align the edges with the paper guides on the printer. Because the edges of the printing area are close to the sprocket holes, it is important to make sure the paper is positioned correctly.

•5mm

When feeding paper with sprocket holes positioned 5 mm from the edge, align the pins in the sprockets with the positions of the paper holes and then turn the knob. Note that in this case there is a gap between the edges of the paper and the paper guides on the printer.

5.Use fan-fold paper with round sprocket holes.

6.When using multiple page fan-fold paper, the perforated line on the margin should be within 5mm of the side of the paper.

15 CITIZEN