Citizen Systems iDP3551 Using Fan-Fold paper iDP3550P Setting the initial, General using

iDP3550/3551 User ’s Manual

4.6.2 Using Fan-Fold paper (iDP3550P) Setting the initial

1.Remove the printer cover.

2.Set the imprint face of the paper downward and put into the paper entrance.

3.If necessary to adjust the sprocket -wheel’s position, free the wheels using the lever on both sides. Slide them to the appropriate position, and lock them back.

(See the left diagram of the below.)

4.Hook some of the paper ’s perforations on the sprockets and forward the paper into the printer mechanism by pulling and turning the paper -feed knob until the paper ’s tip reaches the platen. ( See the right diagram of the below.)

General using

1.Set the imprint face of the paper downward and put into the paper entrance.

2.Hook some of the paper's perforations on the sprockets and forward the paper into

the printer mechanism by pulling and turning the paper -feed knob.

Knob		Sprocket
	LOCK	(Pin tractor)

FREE

Knob

Platen

14 CITIZEN