ESC ⁄ n data CR or LF | Citizen Systems iDP3551, iDP3550 guide

iDP3550/3551 User ’s Manual

ESC "⁄" n "data" CR or LF

[Function]	Defining the message
[Code]	<1B>H <2F>H n "data" CR or LF
[Range]	1 ≤ n ≤ 10
[Outline]	This command can define up to a 50-byte message in one line. If the value of n is
	specified beyond the range, the data following n will be treated as the print data.
	Once the message is defined, it remains valid until it is redefined. The data should end
	with CR (0DH) or LF (0AH). If the data exceeds 50 bytes, the subsequent data will be
	treated as the print data.
	Once the message is defined, it remains valid until it is redefined or the download deletion
	command (ESC DC2 n1 n2) is executed.

[Function]	Printing the message
[Code]	<1B>H <13>H n
[Range]	1 ≤ n ≤ 10
[Function]	This command prints a message. If the value of n is specified beyond the range or if
	nothing is specified to n, the messag e will not be printed.