iDP3550/3551 User ’s Manual
ESC "L" n1 n2 m1 m2 ... | (Graphic Type) | |
[Function] | Specifying the |
|
[Code] | <1B>H <4C>H n1 n2 m1 m2 ... |
|
[Range] | 1 ≤ n1 + 256 ⋅ n2 ≤ 230 (for DP650 mechanism) |
|
| 1 ≤ n1 + 256 ⋅ n2 ≤ 280 (for DP652 mechanism) |
|
| 1 ≤ n1 + 256 ⋅ n2 ≤ 360 (for DP654 mechanism) |
|
| 1 ≤ n1 + 256 ⋅ n2 ≤ 400 (for DP657 mechanism) |
|
[Outline] | This command prints the | Printing will be |
| unidirectional. The surplus data exceeding the printable quantity in one line will be | |
| ignored. The printer will automatically return to the character mode after printing the bit | |
| image. |
|
| The relations between the printing head pin numbers and the data are the same as the | |
| standard density bit image command, <ESC> "K.". When printing the double density bit | |
| image, the horizontally adjacent dots cannot be printed. |
|
ESC "h" n | (Graphic Type) |
[Function] | Specifying/Canceling the double height character |
[Code] | <1B>H <68>H n |
[Outline] | The data following this command is printed in double height characters, except the bit image |
| mode <ESC> "K" and <ESC> "L". In combination with the <SO> command, this |
| command can print double height, double width characters. |
| It cannot be combined with the inverted character command, <SI>. The double height |
| characters and ordinary characters shall be bottom |
77 | CITIZEN |
