iDP3550/3551 User ’s Manual
ESC "∗" n1 n2
[Function] | Specifying the bit image mode |
[Code] | <1B>H <2A>H n1 n2 |
[Range] | 1 ≤ n1 + 256 ⋅ n2 ≤ 230 (for DP650 mechanism) |
| 1 ≤ n1 + 256 ⋅ n2 ≤ 280 (for DP652 mechanism) |
| 1 ≤ n1 + 256 ⋅ n2 ≤ 360 (for DP654 mechanism) |
| 1 ≤ n1 + 256 ⋅ n2 ≤ 400 (for DP657 mechanism) |
[Outline] | This command allows printing in the bit image mode. Divide the number of dots printed |
| by 256 and assume its quotient to be n2 and remainder to be n1. Therefore, the number of |
| horizontal dots will be n1 + 256 ⋅ n2. |
| If the bit image data is entered beyond the dot positions printable in one line, the surplus |
| data will be discarded. Normal data processing is restored after bit image printing. |
| Printing is done in a single direction. |
ESC "−" n
[Function] | Specifying/Canceling the underline |
|
[Code] | <1B>H <2D>H n |
|
[Outline] | This command selects/deselects an underline. | The underline is selected at n = 1 and |
| deselected at n = 0. |
|
[Default] | n = 0 |
|
| 49 | CITIZEN |
