15
Using Rethermalization Mode
Turn the MINI on with the ON/OFF key.
1. Press the Retherm key.
a. The display shows the last nominal values selected or the d efault values for rethermalizing.
b. To start immediately, press the Start/Stop key.
OR:
1. Press the Temperature key.
The oven temperature appears on the display.
Set the required oven temperature from 248°F to 320°F with the Selector Dial.
2. Select Time or Core Temperature m ode:
Time: Press the Time key. Set the desired cooking time or select continuous m ode (at 9:59 or
0:01, release the Selector Dial and then turn again to the left or the right unti l
- : - -
appears).
Core Temperature: Press the core temperature key and set the desired core temperature.
2. Press the Start/Stop key.
Retherm mode starts.
The display shows the nominal oven temperature and the rethermalizing tim e remaining OR the
actual core temperature.
3. To change the set values while o perating, press the Temperature, Time, or Core Temperature key
and set the temperature, time or core temperature with the Selector Dial. T he new value appears in
the display
4. To read the actual oven tem perature, nominal cooking time, and nominal core temperature: press
the relevant key either once or twice needed.
5. When the set time has elapsed or th e core temperature has been reached, the Signal Tone sounds
and the recipe ends.
6. Press the Start/Stop key or open the door to stop the Signal Tone.
The following advanced functions are available through the Smart Key whe n “Retherm” mode is ON:
Tray Timer
Pre-Heating
Vapor Reduction
See Chapter 5, “Advanced Functions” for details.