Contents

4-4-4. Network Cable Connection (Not Available on CDR0410)

Our Network Cable Connector is designed for RJ45 type cables.

Connect the Network cable here to utilize the network function of the DVR

4-4-5. Mouse Connection

This port is designed for PS/2 devices.

Connect the mouse here to utilize the device in the DVR system

4-4-6. Sensor Connection

The DVR unit has 4 Input ports for Sensors.

.

trigger To connect, press the trigger to open the socket Ú Note : the trigger may be difficult to press.

4-4-7. Alarm Output Connection

To connect Alarm Output, Connect one end of the cable to the

Common socket (COM) and the other to either Normal

Open(N.O) depending on system setup.

Like the Sensor Connection (Refer to 4-3-6), the trigger must

be pushed to insert the cable.

trigger

- 17 -

Page 18
Image 18
Clover Electronics CDR0430 Network Cable Connection Not Available on CDR0410, Mouse Connection, Sensor Connection