Sanitation HotCup Operators’ Guide
6740001 96 November, 2007
• If the motor drive link is aligned properly, the flat on the cam wheel will seat on the bearing.
• If the motor drive link is not aligned properly, the flat on the cam wheel is turned away from the
bearing. You must manually turn the cam wheel to capture the bearing on the flat.
i. Assemble in the reverse order of disassembly. NOTE: when replacing the screen and seal assembly,
make sure you hear TWO CLICKS as you push it all the way in.
j. Feed new filter paper through paper guide and brewer as shown, and don't forget to connect the
hose(s)!